Renewable Design for Steel Industry Graphite Electrode - 600 UHP graphite electrode – Hexi
Renewable Design for Steel Industry Graphite Electrode - 600 UHP graphite electrode – Hexi Detail:
Compared with HP and RP electrodes, UHP graphite electrodes have more advantages as follows:
*Lower electrical resistivity, the lower the resistivity, the better the conductivity and consumption
*Heat tolerance and oxidation resistance, reducing physical and chemical loss in practice, especially at high temperature in practice.
*Smaller coefficient of thermal expansion,the lower the coefficient, the stronger the thermal stability of the product and the higher the oxidation resistance.
*Low ash content, which will get oxidation resistance improved much.
| Comparison Technical Specification for UHP Graphite Electrode 24″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 600 |
| Max Diameter | mm | 613 |
| Min Diameter | mm | 607 |
| Nominal Length | mm | 2200-2700 |
| Max Length | mm | 2300-2800 |
| Min Length | mm | 2100-2600 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥10.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.4 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 52000-78000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.80-1.86 |
| transverse strength | MPa | ≥24.0 |
| Young’ Modulus | GPa | ≤20.0 |
| Specific Resistance | µΩm | 3.0～3.6 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value "unification, determination, tolerance" for Renewable Design for Steel Industry Graphite Electrode - 600 UHP graphite electrode – Hexi, The product will supply to all over the world, such as: Chile, Casablanca, India, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.
By Elvira from Bulgaria - 2018.12.22 12:52
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Marco from Islamabad - 2017.02.14 13:19
