Renewable Design for Carbon Power Graphite Electrodes-C - UHP 550mm Graphite Electrode – Hexi
Renewable Design for Carbon Power Graphite Electrodes-C - UHP 550mm Graphite Electrode – Hexi Detail:
Graphitization is a very important stage in UHP graphite electrode production. It refers to the high-temperature heat treatment process of carbon products above 2300 ℃ in a high-temperature electric furnace to convert amorphous chaotic layer structure carbon into a three-dimensional ordered graphite crystal structure.
What’s the funtion of graphitization?
*Improve the electrical and thermal conductivity
*Improve the thermal shock resistance and chemical stability (the linear expansion coefficient is reduced by 50-80%);
*Make the carbon material have lubricity and wear resistance;
*Discharge impurities and improve the purity of the carbon material (the ash content of the product is reduced from 0.5% to about 0.3%).
| Comparison Technical Specification for UHP Graphite Electrode 22″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 550 |
| Max Diameter | mm | 562 |
| Min Diameter | mm | 556 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥12.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.6 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 45000-65000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.78-1.84 |
| transverse strength | MPa | ≥22.0 |
| Young’ Modulus | GPa | ≤18.0 |
| Specific Resistance | µΩm | 3.4～3.8 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Renewable Design for Carbon Power Graphite Electrodes-C - UHP 550mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Roman, Qatar, Bangladesh, Till now, the items list has been updated regularly and attracted clients from around the globe. Comprehensive facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are likely to help you get thorough acknowledge about our goods and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
By Hellyngton Sato from Nairobi - 2017.05.02 11:33
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Alexander from Belgium - 2017.09.09 10:18
