OEM Manufacturer Graphite Electrodes For Arc Furnaces - UHP 550mm Graphite Electrode – Hexi

Short Description:

Product Detail

Product Tags

Feedback (2)

owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Carburizer, Super Fine Graphite Powder, High-Ranking Carbon Graphite Rods, All the time, we have been paying attention on all details to insure each product satisfied by our customers.

OEM Manufacturer Graphite Electrodes For Arc Furnaces - UHP 550mm Graphite Electrode – Hexi Detail:

Graphitization is a very important stage in UHP graphite electrode production. It refers to the high-temperature heat treatment process of carbon products above 2300 ℃ in a high-temperature electric furnace to convert amorphous chaotic layer structure carbon into a three-dimensional ordered graphite crystal structure.

What’s the funtion of graphitization?

*Improve the electrical and thermal conductivity

*Improve the thermal shock resistance and chemical stability (the linear expansion coefficient is reduced by 50-80%);

*Make the carbon material have lubricity and wear resistance;

*Discharge impurities and improve the purity of the carbon material (the ash content of the product is reduced from 0.5% to about 0.3%).

Comparison Technical Specification for UHP Graphite Electrode 22″

Electrode
Item	Unit	Supplier Spec
Typical Characteristics of Pole
Nominal Diameter	mm	550
Max Diameter	mm	562
Min Diameter	mm	556
Nominal Length	mm	1800-2400
Max Length	mm	1900-2500
Min Length	mm	1700-2300
Bulk Density	g/cm3	1.68-1.72
transverse strength	MPa	≥12.0
Young’ Modulus	GPa	≤13.0
Specific Resistance	µΩm	4.5-5.6
Maximum current density	KA/cm2	18-27
Current Carrying Capacity	A	45000-65000
(C.T.E)	10-6℃	≤1.2
ash content	%	≤0.2

Typical Characteristics of Nipple (4TPI)
Bulk Density	g/cm3	1.78-1.84
transverse strength	MPa	≥22.0
Young’ Modulus	GPa	≤18.0
Specific Resistance	µΩm	3.4～3.8
(C.T.E)	10-6℃	≤1.0
ash content	%	≤0.2

UHP 550mm Graphite Electrode3 UHP 550mm Graphite Electrode0 UHP 550mm Graphite Electrode1 UHP 550mm Graphite Electrode2

Product detail pictures:

Related Product Guide:

We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for OEM Manufacturer Graphite Electrodes For Arc Furnaces - UHP 550mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Sacramento, Chile, Turkey, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we are going to continue with the most qualified and high quality service to offer the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!

600mm Uhp Graphite Electrode