OEM manufacturer Carbon Electrode Graphite - UHP 550mm Graphite Electrode – Hexi
OEM manufacturer Carbon Electrode Graphite - UHP 550mm Graphite Electrode – Hexi Detail:
Graphitization is a very important stage in UHP graphite electrode production. It refers to the high-temperature heat treatment process of carbon products above 2300 ℃ in a high-temperature electric furnace to convert amorphous chaotic layer structure carbon into a three-dimensional ordered graphite crystal structure.
What’s the funtion of graphitization?
*Improve the electrical and thermal conductivity
*Improve the thermal shock resistance and chemical stability (the linear expansion coefficient is reduced by 50-80%);
*Make the carbon material have lubricity and wear resistance;
*Discharge impurities and improve the purity of the carbon material (the ash content of the product is reduced from 0.5% to about 0.3%).
| Comparison Technical Specification for UHP Graphite Electrode 22″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 550 |
| Max Diameter | mm | 562 |
| Min Diameter | mm | 556 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥12.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.6 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 45000-65000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.78-1.84 |
| transverse strength | MPa | ≥22.0 |
| Young’ Modulus | GPa | ≤18.0 |
| Specific Resistance | µΩm | 3.4～3.8 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for OEM manufacturer Carbon Electrode Graphite - UHP 550mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Austria, Croatia, Bahamas, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
By Steven from St. Petersburg - 2017.12.02 14:11
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Barbara from Hanover - 2018.11.02 11:11
