High Quality With Graphite Electrodes - 500mm high power graphite electrode – Hexi
High Quality With Graphite Electrodes - 500mm high power graphite electrode – Hexi Detail:
HP and UHP series of graphite electrode are very common in practice. There is a great demand in the world market. They are fit for electrical arc furnace, laddle furnace, and submerged arc furnace.
HP 500mm graphite electrodes are very common in practice. There is a great demand in the world market. They are fit for electrical arc furnace, laddle furnace, and submerged arc furnace.
The loss of graphite electrodes in electric furnace steelmaking is very common, what are they and what is it related to? The following description is for your reference.
Physical loss
The physical loss of the electrode mainly refers to the end consumption and side consumption of the electrode, which is mainly caused by mechanical external force and electromagnetic force. It is concluded as follows
Looseness and breakage at the joint, cracking of the electrode and part of the thread of the joint falling off, which is caused by poor quality of the electrode itself,
In terms of equipment, improper electrode diameter selection, poor electrode holder, lifting and control devices;In terms of operation, large pieces of scrap collapses, hitting the electrode and poor connection between two electrodes
Chemical loss
Mainly refers to the consumption of the electrode surface, including the consumption of the electrode end and side. Generally speaking, the end consumption can reach 50% of the total electrode consumption, and the side consumption is about 40%. The larger the contact area between the electrode and the air, the greater the intensity of the oxidation reaction, and the consumption will increase accordingly.
Physical Dimension and Typical Properties
| Comparison Technical Specification for HP Graphite Electrode 20″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 500 |
| Max Diameter | mm | 511 |
| Min Diameter | mm | 505 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.68-1.73 |
| transverse strength | MPa | ≥11.0 |
| Young’ Modulus | GPa | ≤12.0 |
| Specific Resistance | µΩm | 5.2-6.5 |
| Maximum current density | KA/cm2 | 15-24 |
| Current Carrying Capacity | A | 30000-48000 |
| (C.T.E) | 10-6℃ | ≤2.0 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI/3TPI) | ||
| Bulk Density | g/cm3 | 1.78-1.83 |
| transverse strength | MPa | ≥22.0 |
| Young’ Modulus | GPa | ≤15.0 |
| Specific Resistance | µΩm | 3.5-4.5 |
| (C.T.E) | 10-6℃ | ≤1.8 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of High Quality With Graphite Electrodes - 500mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Paraguay, California, Mauritius, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
By Claire from Honduras - 2017.06.16 18:23
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Elma from Rio de Janeiro - 2017.08.18 18:38
