Factory source Electric Arc Furnace Graphite Electrode - UHP 550mm Graphite Electrode – Hexi
Factory source Electric Arc Furnace Graphite Electrode - UHP 550mm Graphite Electrode – Hexi Detail:
Graphitization is a very important stage in UHP graphite electrode production. It refers to the high-temperature heat treatment process of carbon products above 2300 ℃ in a high-temperature electric furnace to convert amorphous chaotic layer structure carbon into a three-dimensional ordered graphite crystal structure.
What’s the funtion of graphitization?
*Improve the electrical and thermal conductivity
*Improve the thermal shock resistance and chemical stability (the linear expansion coefficient is reduced by 50-80%);
*Make the carbon material have lubricity and wear resistance;
*Discharge impurities and improve the purity of the carbon material (the ash content of the product is reduced from 0.5% to about 0.3%).
| Comparison Technical Specification for UHP Graphite Electrode 22″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 550 |
| Max Diameter | mm | 562 |
| Min Diameter | mm | 556 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥12.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.6 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 45000-65000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.78-1.84 |
| transverse strength | MPa | ≥22.0 |
| Young’ Modulus | GPa | ≤18.0 |
| Specific Resistance | µΩm | 3.4～3.8 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Factory source Electric Arc Furnace Graphite Electrode - UHP 550mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Finland, Congo, Lahore, We adhere to client 1st, top quality 1st, continuous improvement, mutual advantage and win-win principles. When cooperation together with the customer, we provide shoppers with the highest high-quality of service. Established good business relations using the Zimbabwe buyer inside the business, we've got established own brand and reputation. At the identical time, wholeheartedly welcome new and old prospects to our company to go to and negotiate small business.
By Nancy from Sri Lanka - 2018.02.08 16:45
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Jamie from Serbia - 2018.10.09 19:07
