Factory Price Graphite Electrode Uhp - 600 UHP graphite electrode – Hexi
Factory Price Graphite Electrode Uhp - 600 UHP graphite electrode – Hexi Detail:
Compared with HP and RP electrodes, UHP graphite electrodes have more advantages as follows:
*Lower electrical resistivity, the lower the resistivity, the better the conductivity and consumption
*Heat tolerance and oxidation resistance, reducing physical and chemical loss in practice, especially at high temperature in practice.
*Smaller coefficient of thermal expansion,the lower the coefficient, the stronger the thermal stability of the product and the higher the oxidation resistance.
*Low ash content, which will get oxidation resistance improved much.
| Comparison Technical Specification for UHP Graphite Electrode 24″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 600 |
| Max Diameter | mm | 613 |
| Min Diameter | mm | 607 |
| Nominal Length | mm | 2200-2700 |
| Max Length | mm | 2300-2800 |
| Min Length | mm | 2100-2600 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥10.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.4 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 52000-78000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.80-1.86 |
| transverse strength | MPa | ≥24.0 |
| Young’ Modulus | GPa | ≤20.0 |
| Specific Resistance | µΩm | 3.0～3.6 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Factory Price Graphite Electrode Uhp - 600 UHP graphite electrode – Hexi, The product will supply to all over the world, such as: Angola, UK, Nairobi, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Lorraine from Iraq - 2017.02.14 13:19
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Rebecca from Berlin - 2018.07.26 16:51
