China New Product Electrode Graphite Uhp - 600mm high power graphite electrode – Hexi

Short Description:

Product Detail

Product Tags

Feedback (2)

It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for Pure Graphite Powder, Graphite Heat Exchange Rod, Graphite Oxide Powder, We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.

China New Product Electrode Graphite Uhp - 600mm high power graphite electrode – Hexi Detail:

Grade:High Power
Applicable furnace: EAF
Length: 2100mm/2400mm/2700mm
Nipple:3TPI/4TPI
Payment: T/T, L/C
Shipping Term: EXW/FOB/CIF
MOQ:10TON

Comparison Technical Specification for HP Graphite Electrode 24″

Electrode
Item	Unit	Supplier Spec
Typical Characteristics of Pole
Nominal Diameter	mm	600
Max Diameter	mm	613
Min Diameter	mm	607
Nominal Length	mm	2200-2700
Max Length	mm	2300-2800
Min Length	mm	2100-2600
Bulk Density	g/cm3	1.68-1.72
transverse strength	MPa	≥10.0
Young’ Modulus	GPa	≤12.0
Specific Resistance	µΩm	5.2-6.5
Maximum current density	KA/cm2	13-21
Current Carrying Capacity	A	38000-58000
(C.T.E)	10-6℃	≤2.0
ash content	%	≤0.2

Typical Characteristics of Nipple (4TPI/3TPI)
Bulk Density	g/cm3	1.78-1.83
transverse strength	MPa	≥22.0
Young’ Modulus	GPa	≤15.0
Specific Resistance	µΩm	3.2-4.3
(C.T.E)	10-6℃	≤1.8
ash content	%	≤0.2

Compared with copper, graphite has advantages such as less consumption, faster discharge rate, lighter weight and smaller thermal expansion coefficient, so it gradually replaces copper electrode to become the mainstream of discharge processing materials. According to the capacity of the electric furnace, graphite electrodes of different diameters are used. For continuous use of the electrodes, the electrodes are connected by the threaded joint of the electrodes. The graphite electrodes used in steel making account for about 70-80% of the total consumption of the graphite electrodes.

Graphite electrode consumption and breakage is common in practice. What causes these? Here is the analysis for reference.

Factors	Body Breakage	Nipple Breakage	Loosening	Spalling	Electtode Loss	Oxidation	Electorde Consumption
Non-conductors in charge	◆	◆
Heavy scrap in charge	◆	◆
Transformer overcapacity	◆	◆		◆	◆	◆	◆
Three phase imbalance	◆	◆		◆	◆		◆
Phase Rotation		◆	◆
Excessive Vibration	◆	◆	◆
Clamper Pressure	◆		◆
Roof electrode socket not align with electrode	◆	◆
Cooling water sprayed on electrodes above roof							△
Scrap preheating							△
Secondary voltage too high	◆	◆		◆	◆		◆
Secondary current too high	◆	◆		◆	◆	◆	◆
Power too low	◆	◆		◆	◆		◆
Oil consumption too high				◆	◆		◆
Oxygen Consumption too high				◆	◆		◆
long time heating							◆
Electrode dipping					◆		◆
Dirty connection part		◆	◆
Poor maintenance for lift plugs and tightening tools		◆	◆
Insufficient connection		◆	◆

◆ Stands for being good factors

△ Stands for being bad factors

600mm high power graphite electrode2

Product detail pictures:

Related Product Guide:

Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for China New Product Electrode Graphite Uhp - 600mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Bangkok, Angola, Malaysia, With more and more Chinese products and solutions around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to supply you both better solutions and service, because we've been more and more powerful, specialist and experience in domestic and international.

Anti-Oxidation Graphite Electrode